|
Note that the references below are used for citing references in the Strut-and-Tie
Method pages in this web site.
1. |
Marti, P., "Basic Tools of Reinforced Concrete Beam Design," ACI Journal, Proceedings, Vol. 82, No. 1, January-February 1985, pp. 45-56. |
2. |
Schlaich, J., Schäfer, K., and Jennewein, M., "Toward a Consistent Design of Structural Concrete," Journal of the Prestressed Concrete Institute, Vol. 32, No. 3, May-June 1987, pp. 74-150. |
3. |
Schlaich, J. and Schäfer, K., "Design and Detailing of Structural Concrete Using Strut-and-Tie Models," The Structural Engineer, Vol. 69, No. 6, March 1991, pp. 113-125. |
4. |
ASCE-ACI Committee 445 on Shear and Torsion, "Recent Approaches to Shear Design of Structural Concrete," Journal of Structural Engineering, ASCE, Vol. 124, No. 12, December 1998, pp. 1375-1417. |
5. |
Comité Euro-International du Béton, CEB-FIP Model Code 1990, Thomas Telford Services, Ltd., London, 1993, 437 pp. |
6. |
FIP Commission 3, Practical Design of Structural Concrete, Fédération Internationale de la Precontrainte, Laussane, Switzerland, September 1999, 114 pp. |
7. |
CSA Technical Committee A23.3, Design of Concrete Structures CAN3-A23.3-M84, Canadian Standards Association, Rexdale, Ontario, 1984, 281 pp. |
8. |
CSA Technical Committee A23.3, Design of Concrete Structures CSA A23.3-94, Canadian Standards Association, Rexdale, Ontario, December 1994, 199 pp. |
9. |
AASHTO, AASHTO LRFD Bridge Specifications, American Association of State Highway and Transportation Officials, 1st ed., Washington, DC, 1994, 1091 pp. |
10. |
AASHTO, AASHTO LRFD Bridge Specifications, American Association of State Highway and Transportation Officials, 2nd ed., Washington, DC, 1998, 1116, pp. |
11. |
ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02), American Concrete Institute, Farmington Hills, Michigan, 2002, 443 pp. |
|
